Td5/Tdci/Puma Complete Rear tailgate Door Kit

The kit comes with every part needed to assemble a complete door including every fastener, clip and bracket.
On our website you will see we have 4 different specs. They all consist of the same main items, the only variations being the glass fitted (we have standard heated glass and high level brake light glass) and the type of locking fitted (we have manual locking and central locking). All of these kits come with the wiring harness loom which connects to the heated glass,wiper motor, central locking motor and high level brake light (if fitted)

We use our door in this kit which is made from zinc plated steel as original so these last a very long time indeed and fit perfectly too. The doors are also coated in a black Electrophoretic coating which not only adds a extra layer of protection inside and out of the door, it is also perfectly smooth so ideal as a base coat to go over with your colour coats. This door kit is ideal as an upgrade for the earlier doors! As these literally just bolt straight onto any year Defender. So all you need to do it paint the door, and then assemble all the parts onto the door. These do not come with any instructions on how to assemble as every part in this kit is standard specification and is logical to assemble for anyone handy with their spanners.

This is the kit with:
Standard Heated glass and central locking.
The handle for the central locking take 20mm diamater lock barrels as fitted to 02-16 models. Lock barrels are not included as your old one will swap over to the new handle in this kit. If you require locks with 16mm diamater as fitted to 83-02 models then you can buy just a key and lock barrel under part number CWC500190. Or you can upgrade your whole ignition and locks at the same time to the larger type. We have quite a few different lock sets on our ignition and locks page on:.
Ignition barrels and lock sets

The main parts of the kit are:

Door
Door loom Harness (LR0162430)
Heated glass
Central locking Handle with gasket and fixings
Central locking actuator with ling rods and mounting plates and fixings
Glass seal
Door card and clips
Grab handle and fixings
Wiper motor assembly with fixings and wiper blade and arm
Torsion bar set up for the check strap
Rear door hinges with stainless steel fixings
Interior light bracket/wiring loom holder

It also includes all the small fixings and clips to attach everything to make the job of assemble as easy and straightforward as possible!