LH Puma Tdci One Piece Steel Front Door (S)

These are high quality aftermarket parts which come in a EP black coating to provide an ideal primer basecoat for then going over with your colour coats.
Every pressing in these doors are pressed exactly as original so the overall quality and fit of these doors is exceptional.

These are the later style doors made from a one piece pressing inner frame and with a steel skin, as fitted originally from 2006-2016 Tdci vehicles. These are a direct replacement for 2006-2016 models.
However these can be retrofitted to earlier models between 1983-2005 if you wish to upgrade to the nicer style inner frame and all steel construction. Please read below:

if you have a pre 2001 vehicle (before Vin number 2A622424) you will need the inner bracket kit we make which means you can bolt your earlier style inner window winding panel to these later spec doors. We have them on our website under part number JWP520 , you will need 1 for each front door.

If you have a vehicle 2001-2006 (ie facelifted Td5 from Vin number 2A622424 onwards) ,you will not need the inner bracket kits as your inner panel will just swap straight over onto these doors.

One minor thing to note, if you are fitting to a 1983-2006 vehicle and you are re using your old door card (they still fit on exactly the same) you are just left with a small gap on the lock side of the inner frame. As in the photo on the listing. This is because the inner profile of the frame is slightly different in this area. Most people are fine with this as it is only small, however if you wished you could change to Puma door cards at the same time.